Global Molybdenum Carbide Mo2C market trend 2022-2029 How is molybdenum carbide Mo2C powder produced? by Newskwa

Commodity prices are on track for their biggest rally in more than a century, while fixed-income assets have seen their longest run of outflows as the war in Ukraine adds to inflationary pressures in the global economy emerging from the coronavirus lockdown, according to Bank of America.

"Commodity prices this year are on track to record their biggest gains since 1915." the bank said in its weekly briefing. They cite many factors, such as pandemics, lockdown, civil strife, wars, excessive monetary and fiscal stimulus, and supply chain disruptions, that have led to "historically" high inflation.  

By the same token, it said government bonds were heading for their worst year since 1949, and "negative-yielding bonds will quietly disappear" from the market as central banks embark on a monetary tightening cycle and raise interest rates to tame soaring inflation.  

The prices of many commodities like the Molybdenum Carbide Mo2C are expected to increase in the future.

Overview of molybdenum carbide Mo2C powder

Molybdenum carbide Mo2C, the molecular weight is 203.88, and the carbon content is 5.89%. It is a dark grey metallic powder with a tightly packed hexagonal lattice. The density is 9.18g/cm and the melting point is 2690℃. As a new functional material, it has high melting point and hardness, good thermal and mechanical stability, and good corrosion resistance. It has been widely used for high temperature resistance, wear resistance and chemical corrosion resistance. Place.

Molybdenum carbide has a hexagonal crystal structure with a = 0.30029 nm and c = 0.472895 nm. Micro Vickers hardness (50g load) is 1950kg/mm2 (compared to 2080kg for WC). / mm2 is softer) with a melting point of 2687°C.

How is molybdenum carbide Mo2C powder produced?

1. Generally, molybdenum carbide powder is first made (using molybdenum and carbon direct chemical method, metal oxide and carbon reduction-chemical method, vapor deposition method and self-propagating high temperature synthesis method), and then made into carbon in vacuum or reducing atmosphere. Sintering is carried out in tube furnace, molybdenum wire furnace and high frequency vacuum furnace (reaction sintering, hot pressing sintering and hot isostatic pressing sintering are mostly used).

 2. After the molybdenum powder and carbon black are fully mixed, they are ground with a ball mill and pressed into shape. In a stream of hydrogen, the product is calcined at 1350-1500°C, then the calcined product is cooled, pulverized and ground. Or use molybdenum trioxide or molybdenum dioxide instead of molybdenum powder reduction method.

 3. Auxiliary metal bath method. With cobalt as auxiliary metal, choose Mo:Co to 1:(1 ~1.5) to form a metal bath, heated to 1800°C in a pure graphite crucible with a Taman furnace in a hydrogen stream, cooled (heated to 1800°C within 1h)°C, kept at 1800°C for 2 to 3h, and cooled to room temperature for 2h) , pulverize the solidified product in a crucible, treat it with warm hydrochloric acid, dissolve and remove cobalt, and obtain powdery Mo2C with a particle size of 150-350 μm, and the purity is: containing bound carbon 5.82% ～ 5.85% (mass), free carbon 0.26% ～ 0.32% (mass), total carbon 6.08% to 6.17% (mass).

 4. Made of metal molybdenum carbide.

Molybdenum trioxide MoO3 is hydrogenated and reduced to obtain molybdenum powder. Then the mixture of molybdenum powder and carbon black [Mo934% (mass) C6.6% (mass)] was dry-blended with a ball mill for about 10 hours, and formed under a pressure of about 1t/cm2. The pressurized block was placed Put it into a graphite plate or crucible, and use a Taman furnace or an induction heating furnace to heat it to 1400 ~ 1500 °C (see picture) in a hydrogen flow (using pure hydrogen with a dew point of about -35 °C), and keep it at this temperature for about 1h . Molybdenum carbide produces Mo2C.

 5. Use synthetic methods.

First, the molybdenum powder was fully mixed with Mo93.4% (mass fraction) and carbon black [containing V6.6% (mass fraction)], then ground with a ball mill for 1 hour, pressure-molded, and placed in an induction furnace. In a hydrogen stream, calcined at 1350-1500 ° C for 1 h, and then the calcined product was cooled, pulverized and ground to obtain the product. Molybdenum trioxide or molybdenum dioxide can also be used instead of molybdenum powder for reduction to obtain molybdenum carbide.

Application of Molybdenum Carbide Mo2C Powder

Molybdenum carbide is a new functional material with high melting point, high hardness and excellent corrosion resistance. It has been widely used in various fields of high temperature, wear resistance and chemical corrosion. It has similar noble metal electronic structure and catalytic properties.

1. Because its electronic structure and catalytic properties are similar to those of noble metals, molybdenum carbide can be widely used as a catalyst for reactions involving hydrogen, such as alkane isomerization, unsaturated hydrocarbon hydrogenation, hydrodesulfurization, denitration, etc.;

2. Molybdenum carbide is an important part of molybdenum-molybdenum carbide hard coating and other cermet coatings, and can also be used as wear-resistant and wear-resistant coatings alone;

3. Molybdenum carbide can be used to produce chromium-free special alloys and engineering ceramics;

4. Molybdenum carbide is used as superhard tool material, wear-resistant material, heating element material, high temperature structural material;

5. Molybdenum carbide is used to produce wear-resistant films and semiconductor films;

6. Molybdenum carbide can be used to manufacture special alloys and engineering ceramics without chromium;

Molybdenum carbide Mo2C powder price

The price of molybdenum carbide Mo2C powder varies randomly with the production cost, transportation cost, international conditions, exchange rate, market supply and demand and other factors of molybdenum carbide Mo2C powder. Tanki New Materials Co.,Ltd aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for Molybdenum Carbide Mo2C Powder, please feel free to contact us for the latest price of Molybdenum Carbide Mo2C Powder.

Molybdenum carbide Mo2C powder suppliers

As a global supplier of molybdenum carbide Mo2C powders, Tanki New Materials Ltd. has extensive experience in advanced engineering material properties, applications and cost-effective manufacturing. The company has successfully developed a series of powder materials (including boron carbide, aluminum carbide, titanium carbide, etc.), high-purity targets, functional ceramics, structural devices, and provides OEM services.

Gas supplies have been in short supply because of the conflict between Russia and Ukraine.  Combined with the situation that other renewable sources cannot produce enough electricity, electricity prices have soared in many parts all over the world. For this reason, I assume the supply and prices of the Molybdenum Carbide Mo2C would keep being influenced by the high energy prices.

Inquery us