What is Natural Graphite Used For?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Wholesale gas prices in the Netherlands and the UK have risen 20 percent recently amid concerns about Russian supplies.

The EU plans to cut its dependence on Russian gas by two-thirds this year and stop importing Russian fossil fuels by 2027. Russia exported about 155 billion cubic meters of gas to the EU in 2021.

The US recently said it would try to supply 15bn cubic meters of LNG to the EU this year. U.S. LNG plants are running at full capacity, and analysts say much of the extra gas the U.S. sends to Europe comes from what should have been exported elsewhere.

The German government called Russia "an unreliable energy supplier". Even though the German government claimed that they have been preparing for the situation for a long time that Russia may stop sending gas one day, experts say it is hard for the EU to replace all of Russia's gas exports any time soon.

The supply and prices of many natural graphite will continue to be influenced by international situations.

Natural graphite is mainly used in refractory materials, batteries, steelmaking, expanded graphite, brake pads, casting surfaces, and lubricants.
 
Refractory 
The use of graphite as a refractory (heat-resistant) material began before 1900 for holding molten metal graphite crucible; This is a small fraction of what refractories are made today.  In the mid-1980s, carbon-magnesium bricks became important, followed later by alumina-graphite shapes. As of 2017, the order of importance is alumina-graphite profiles, carbon-magnesite bricks, Monolithics (a mixture of spray-patching and pounding), and then crucible. 
The crucible began to use very large sheets of graphite, whereas carbon-magnesia bricks did not require such large sheets of graphite; For these and other purposes, sheet sizes are now required with greater flexibility, and amorphous graphite is no longer limited to low-end refractories. Alumina-graphite profiles are used as continuous castings, such as nozzles and grooves, to transport molten steel from ladles to molds, and carbon-magnesium bricks are lined up in converter and electric-arc furnace to withstand extreme temperatures. Graphite blocks are also used as components in blast furnace linings where the high thermal conductivity of graphite is essential to ensure adequate cooling of the furnace bottom and chamber. High purity monolithic tiles are usually used as continuous furnace linings rather than carbon magnesia bricks. 
 
Battery 
The use of graphite in batteries has increased since the 1970s. Natural and synthetic graphite is used as an anode material for constructing electrodes in major battery technologies.
The demand for batteries, mainly nickel-metal hydride, and lithium-ion batteries, led to an increase in demand for graphite in the late 1980s and early 1990s - an increase driven by portable electronic devices, such as portable CD players and power tools. Laptops, phones, tablets, and smartphones have increased the need for batteries. Electric vehicle batteries are expected to increase graphite demand. The lithium-ion battery in the all-electric Nissan Leaf, for example, contains nearly 40 kilograms of graphite. 
Radioactive graphite from old nuclear reactors is being studied as fuel. Nuclear diamond batteries have the potential to provide long-term energy for electronics and the Internet of things.
 
Steelmaking 
Natural graphite in steelmaking is mainly used to improve the carbon content in molten steel. It can also be used to lubricate molds used to extrude hot steel. Carbon additives face competitive prices from alternatives such as synthetic graphite powder, petroleum coke, and other forms of carbon. Carburizing agent is added to raise the carbon content of the steel to a specified level.
 
Brake pads
Natural amorphous and fine-scale graphite is used in brake linings or shoes for heavier (non-automotive) vehicles and has become important as a replacement for asbestos is needed. This use has been important for a long time, but non-asbestos organic (NAO) ingredients are beginning to reduce graphite's market share. 
 
Casting coat and lubricant 
The mold cleaning liquid for casting is a water-based amorphous or fine-scale graphite coating. Paint the inside of the mold with it and let it dry, leaving a fine coating of graphite that eases the separation of the casting as the hot metal cools. Graphite lubricants are special products used at very high or very low temperatures, used as lubricants for forging dies, anti-stuck agents, gear lubricants for mining machinery, and lubricating locks. There is a great need for low grain graphite and even better non-grain graphite (ultra-high purity).  It can be used as a dry powder in water or oil, or as colloidal graphite (a permanent suspension in liquid).
 
Pencil 
Since the 16th century, all pencils have been made from graphite naturally found in Britain, but the most common modern lead is a mixture of powdered graphite and clay. 
 
Other uses 
Natural graphite has found use in zinc-carbon batteries, motor brushes, and a variety of specialized applications. Graphite of different hardness or softness produces different qualities and tones when used as an artistic medium. Railroads often mix graphite powder with waste oil or flaxseed oil to form a heat-resistant coating for exposed parts of steam locomotive boilers, such as the lower part of a smoke box or firebox. 
 
Expanded graphite 
Expanded graphite is made by dipping natural flake graphite into a bath of chromic acid, followed by concentrated sulfuric acid, which forces the lattice planes apart and causes the graphite to expand. Expanded graphite can be used in the manufacture of graphite foil or directly used as the "hot top" compounds, to isolate in the molten metal ladle or hot ingot and reduce heat loss, or used as a fire door installed in or around the fire damper in the sheet metal plate plastic pipes around the lantern ring (in the fire, the graphite expansion and carbonized in the infiltration and spread of resistance to fire), or high-performance gasket materials used in the manufacture of high-temperature use. After making graphite foil, the foil is machined and assembled into bipolar fuel cells. Aluminum foil is made into radiators for laptops, keeping them cool while reducing weight, and is made into foil laminates that can be used as valve fillers or made into gaskets. Old-fashioned fillers are now a minor member of the group: fine scales of graphite in oil or grease, used for applications requiring heat resistance.
 
Natural graphite Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest natural graphite price, you can send us your inquiry for a quote. ([email protected])
 
Natural graphite Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality natural graphite, please feel free to contact us and send an inquiry. ([email protected])
 

The negative electrode material is the carrier of lithium ions and electrons during the charging process of the battery and plays the role of energy storage and release. In the battery cost, the negative electrode material accounts for about 5%-15%, which is one of the important raw materials for lithium-ion batteries. The global sales of lithium battery anode materials are about 100,000 tons, mainly in China and Japan. According to the current growth trend of new energy vehicles, the demand for anode materials will also show a state of continuous growth. At present, the global lithium battery anode materials are still dominated by natural/artificial graphite, and new anode materials such as mesh carbon microspheres (MCMB), lithium titanate, silicon-based anodes, HC/SC, and metal lithium are also growing rapidly.
Our company provides anode materials and natural graphite. If you need to know more anode materials and natural graphite, please feel free to contact us.

Inquiry us